The Foras assortment
Five pump groups covering water supply, pressure control and irrigation-related installations.
Jet pumps
Suitable for self-priming pump applications, including common water supply and irrigation tasks where suction conditions allow.
Centrifugal pumps
Used for water movement in larger garden, field and nursery applications where more capacity may be required.
Multi-stage pumps
Support applications where a staged pump design is required as part of a professional water installation.
Pressure sets
Combine pump operation with pressure control for pressurised water systems and automatic start-stop applications.
Submersible pumps
Used where the pump is installed in water, including well-related situations described for deeper groundwater.
Spare parts
Find compatible spare parts for your Foras pump and keep existing installations running.
Choose by application
Four broad applications represent the FORAS range at Bosta. Not every family is used in every application.
|
Water supply & pressure boosting
Pressurised water supply for houses, gardens and small systems, typically with a pressure vessel.
Relevant FORAS families:
JA · JXF · JA and JXF pressure sets · MON |
Irrigation & agriculture
Garden irrigation, rainwater use and larger irrigation systems, including submersible supply from a borehole.
Relevant FORAS families:
JA · JXF · MN · 5FES |
|
Industrial water systems & liquid transfer
Water supply, cooling, heating and pressurisation in industrial systems, plus liquid transfer and tank emptying.
Relevant FORAS families:
MN · JA (transfer and tank emptying) · PC (liquid transfer) |
Drainage & submersible water supply
Drainage and dewatering are one duty; borehole water supply is another. Select the series for the job.
Drainage & dewatering: SP · DS · DC · FV
Borehole water supply: 5FES |
Selecting the right FORAS pump
Select the model using the required flow, the total head and the individual FORAS pump curve. Suction capability and operating limits are model-specific, so always check the product data.
|
01
Flow requirement
Work out how much water the application needs. Select from the pump curve of the model, not from a single headline figure.
|
02
Required head
Total head is the pressure the pump must deliver at the required flow, including height and pipe losses. Check it against the FORAS curve of each candidate.
|
03
Water source
Tank, well, borehole, sump or pit? The source and its position relative to the pump help decide the pump group.
|
|
04
Surface or submersible
Surface pumps sit outside the liquid; submersible pumps work in it. Drainage (SP, DS, DC, FV) and borehole supply (5FES) are different duties.
|
05
Liquid & application
Clean water, drainage water or a liquid such as fuel? Check the liquid and operating conditions on the product page of the specific model.
|
06
Power supply
Models are available for single-phase and three-phase supplies. Check the electrical data of the model against your site supply.
|
How the FORAS groups differ
A quick comparison of role and installation. Model-specific data is available on the individual product pages.
| Pump group | FORAS families | Installation | Typical role | Main selection consideration |
|---|---|---|---|---|
| Jet pumps | JA · JXF | Surface | Self-priming pumps for water supply, irrigation and liquid transfer | Suction conditions, flow and head |
| Pressure sets | JA · JXF | Surface, supplied as a set | Pressurised water supply with tank, switch and gauge | Set contents, flow and head |
| Centrifugal pumps | KM · KB · MN | Surface | General surface pumping; threaded (KM, KB) or flanged (MN) | Connection type, flow and head, liquid |
| Multi-stage pumps | MON · P3S · P7SV | Surface: horizontal (MON, P3S) or vertical (P7SV) | Pressurisation duties; MON is self-priming | Orientation, flow and head, self-priming (MON) |
| Submersible pumps | SP · DS · DC · FV · 5FES | Submersible | Drainage and dewatering (SP, DS, DC, FV); borehole water supply (5FES) | The duty first, then flow and head |
| Liquid transfer pumps | PC | Surface | Liquid transfer with a liquid-ring pump | Liquid suitability and manufacturer guidance |
Technical values such as flow, head, temperature and connection size are model-specific. Refer to the individual product page before selection.
More than a pump
A FORAS pump is usually one part of a larger installation. Bosta can supply the pump together with pipework, valves, filtration and other components from its wider assortment.
A typical, application-dependent arrangement. Not every installation needs every element.
|
Pump selection
Choose the FORAS family for the application, then confirm the individual model against the required flow and total head.
|
Filtration
Where filtration is required by the water source or application, Bosta offers AZUD filtration solutions and skids.
|
|
Pipework & valves
Depending on the application, complete the installation with suitable pipework, fittings and valves from the wider Bosta range.
|
Applications & solutions
Bosta supports complete water projects across irrigation, industrial applications and rainwater systems.
|
Popular Foras products
A recognised pump manufacturer
Pentax manufactures Foras pumps and applies quality control across material selection, production testing and final inspection. Hydraulic and electrical parts are tested during production, with checks including pressure and flow-related testing.
This makes Foras a practical option when a project requires a clear pump choice from a recognised pump manufacturer, without adding unnecessary complexity to the installation. The assortment is especially relevant for professionals who need to match pump type to suction depth, pressure demand, pipework and sprinkler requirements.
Frequently asked questions about Foras
Make sure the pump can draw in enough water and that no air enters the suction line. Air in the suction line can prevent the pump from reaching the required pressure and capacity. A centrifugal pump can draw water to a maximum depth of 8 metres - if the groundwater is deeper, a well pump must be selected.
An above-ground centrifugal pump should be drained properly in winter to help prevent freezing in the pump housing, by removing the drain plugs so the water can run out. A well pump can remain in the well, and occasional longer operation can help prevent it from sticking.
A pump can be combined with a pressurised water system or another automatic start-stop system. With a pressure switch or regulator, the pump starts when pressure falls below the set value and stops at the maximum set value. With frequency control, the set pressure is maintained across the system.
Selecting the correct pump requires knowing the required flow at a given pressure. The number of nozzles, nozzle type and sprinkler pattern determine the litres per hour needed. The pump curve table can then be used to match required pressure and litres.
For a normal garden, a self-priming jet pump is generally chosen. For a larger field or nursery with larger sprinklers, a larger centrifugal pump can be suitable. For large irrigation reels, a large well pump is often selected.
Foras product groups include jet pumps, pressure sets, centrifugal pumps, multi-stage pumps and submersible pumps.