Please note: As we prepare to launch our UK warehouse, some products may show as in stock for the UK, but UK fulfilment has not yet commenced. Please refer to stock availability at our Veghel NL warehouse, as all available products are currently shipping from our European Distribution Centre in Veghel.
Basket

Slurry knife valves for water and slurry pipework

Slurry knife valves are shut-off valves for water and slurry installations where a flanged valve is required in the pipework. The available industrial knife gate valves are cast iron, varnished green models with flange connections, making them relevant for slurry pipeline knife valve duties and pipeline isolation valves in technical systems.

Selection should start with the basic connection and sizing details. The product information references DN150 and DN200 sizes, 6-inch and 8-inch flange descriptions, PN10 and PN10/16 flange references, and pressure ratings of 8 bar or 10 bar depending on the model. These details should be matched against the existing pipework before ordering.

Flanged cast iron knife valve options

Available slurry shut-off knife valves include flanged cast iron models identified as type 0090 and type 0092. The type 0090 valve is has a 6-inch flange, DN150 size, 10 bar pressure rating and PN10/16 flange reference. The type 0092 valve has an 8-inch flange, DN200 size, 8 bar pressure rating and PN10 flange reference.

The cast iron flange knife valve type 0090 is supplied in more than one variant, so the exact configuration should be checked against the installation requirement. For larger nominal diameter pipework, the cast iron flange knife valve type 0092 provides a DN200 option with the stated PN10 reference.

Sizing, flange reference and pressure rating

DN size is the first practical selection point for slurry pipeline knife valves. DN150 and DN200 references should be checked against the pipework and the space available for the valve. The inch flange descriptions can also help when matching a replacement valve to an existing installation, but the nominal diameter and flange reference should remain the primary checks.

Pressure rating is another key selection factor. Ratings should be compared with the intended operating conditions of the water or slurry line. Do not select a valve only by product type when the pressure rating, PN reference or nominal diameter differs from the installed system.

Industrial knife gate valve selection considerations

Industrial slurry control valves should be selected as part of the wider pipeline assembly. Check the flange reference, the required shut-off position, the valve size and the surrounding pipework before specifying a replacement. Where slurry contains solids or where wear is a concern, confirm the required knife valve components and valve parts for the selected model before installation or maintenance work.

Knife gate flow control valves and heavy-duty flow control valves are often selected for practical isolation points in slurry handling pipework, but the exact duty must be matched to the stated valve data. Cast iron construction, varnished finish, flange type, DN size and pressure rating are the supported comparison points for these products.

Related knife valve and accessory choices

For a focused valve choice within heavy couplers for water and slurry, compare the available knife valves by nominal diameter, PN reference and stated pressure rating. Slurry valve accessories and knife valve components should be selected to suit the installed valve type, especially when maintenance, replacement or pipeline isolation work is planned.

Before final selection, check whether the requirement is for DN150 or DN200 pipework, whether PN10 or PN10/16 is needed, and whether the 8 bar or 10 bar pressure rating is suitable for the system. Matching these details helps avoid incorrect valve selection in water and slurry installations.